Costruzioni Meccaniche Fini
Costruzioni Meccaniche Fini
Storage tanks
Accumulator: water glycol solution vessel
Design Code: ASME VIII div. 1.
Shell Material: ASME SA 516 Gr. 60.
Thk.10 mm.
Weight 7 tons.
Volume 14700 litres.
Lpg storage vessel
Special requirements: Wet H2S Service.
Design code: EN13445.
Material: EN10028-3 P355NL2 HIC TESTED.
Thk. 18 mm.
Weight: 38 tons.
Volume 200’000 litres.
Sulphur accumulator
Special requirements: Wet H2S Service.
Design code: ASME VIII div. 1.
Material: ASME SA 516 Gr.60 HIC TESTED.
Thk. 12 mm.
Weight: 43 tons.
Volume: 130250 litres.
Knock out drum
Design code: ASME VIII div. 1.
Material: ASME SA 516 Gr.60.
Thk. 10 mm.
Weight: 3.5 tons.
Volume: 6300 litres.
Vertical storage tank
Design code: EN13445.
Material: ASME SA 240 316L.
Thk. 6 mm.
Weight: 6 tons.
Volume: 80000 litres.
Pao knock out pot
Design code: ASME VIII div. 1.
Material: ASME SA 240 N08904 (SS904L)
Thk. 12 mm.
Weight: 760 kg.
Volume: 750 litres.
Steam drum
Design code: EN13445
Material: EN10028-3 P460 NH
Thk. 48 mm.
Weight: 30 tons.
Volume: 27000 litres.
Reactors
Hydrofining reactor
Design code: ASME VIII div. 1.
Material: ASME SA 387 Gr. 11 CL.2 + ESW Overlay 304L.
Thk. 25 mm + 4 mm w.o.
Weight: 11 tons.
Volume: 15500 litres.
Koh treater
Special requirements: HF Service.
Design code: ASME VIII div. 1.
Material: ASME SA 516 Gr. 60 + SB 127 N4400 Clad Plates.
Thk. 12 mm + 3.2 mm Clad
Weight: 12 tons.
Volume: 28000 litres.
Acid settler
Special requirements: HF Service.
Design code: EN13445
Material: ASME SA 516 Gr. 70.
Thk. 25
Weight: 68 tons.
Volume: 190000 litres.
Blow down alkilation unit
Special requirements: HF Service
Design code: EN13445
Material: EN10028-3 P275NH.
Thk. 10
Weight: 13 tons.
Volume: 75000 litres
Oxidized oil decanter
Jacketed Vessel
Design code: EN13445
Material: SHELL ASME SA 240 316L/ Jacket ASME SA 516 Gr 60
Thk. 14 / 8
Weight: 7 tons.
Volume: 12000 litres
Liquid sulphur degassing system Jacketed vessel
Design code: EN13445
Material: Shell ASME SA 516 Gr 60 + ESW 316L Weld Overlay / Jacket ASME SA 516 Gr. 60
Thk. 25+3 w.o. / 12
Weight: 18 tons.
Volume: 15000 litres
Columns
Stripper colum and Separators
Design Code: ASME VIII div. 1.
Shell Material: ASME SA 516 Gr. 70.
Thk. 28 mm.
Dia. 1525 / 2450 mm;
Height 30 m;
Weight 45 tons.
Volume 90000 litres.
Amine regenerator
Design Code: EN13445
Shell Material: ASME SA 240 316
Thk. 12 mm.
Dia. 2438;
Height 20 m;
Weight 17 tons.
Volume 80000 litres.
Internals installed by CMF
Topping tower
Design Code: EN13445
Shell Material: EN10028-3 P355NH + Clad SS317L / ASME SA 240 UNS S31254
Thk. 18+3 mm; 20 mm.
Dia. 7000; Height 54 m; Weight 320 tons
Volume 1’870’000 litres
Partially assembled on site
Internals installed by CMF
With externals platforms
Sour water stripper
Design Code: ASME VIII Div. 1.
Shell Material: Bottom sect. ASME SA 240 UNS S32205 / top sect. ASME SB 575 UNS N10276
Thk. 8 mm
Dia. 1525;
Height 19m;
Weight 9 tons
Volume 30000 litres
Topping tower repair
Design Code: ASME VIII div. 1 + ISPESL Racc. VSR
Shell Material: ASME SA 516 Gr. 70
Thk. 16 mm.
Dia. 7000;
Height 13 m;
Weight 45 tons
Supply of section and maritime transportation from CMF workshop to Refinery.
Alkylation acid redistillation
Design Code: ASME VIII div. 1.
Shell Material: ASME SB 127 UNS N04400
Thk. 10 mm
Dia. 800;
Height 8 m;
Weight 3 tons
Volume 2500 litres
Aircooled Heat exchangers
Air-Cooled Heat Exchanger
Header Boxes: Carbon Steel Cladded NI Alloy C-276
Tubes: NI Alloy C276
Frame: Carbon Steel Hot Dip Galvanized
Weight – Dimensions (W x L): 13.700 kg – 3.050 x 6.630
Air-cooled heat exchanger with removable cover
Header Boxes: Carbon Steel
Tubes: Carbon Steel
Frame: Carbon Steel Hot Dip Galvanized
Weight – Dimensions (W x L): 6.700 kg – 2.750 x 12.700
Type: air-cooled heat exchanger with plugs
Header Boxes: Carbon Steel
Tubes: Carbon Steel
Frame: Carbon Steel Hot Dip Galvanized
Weight – Dimensions (W x L): 5.520 kg – 2.440 x 9.800
Type: air-cooled heat exchanger with plugs
Header Boxes: Carbon Steel
Tubes: Carbon Steel
Frame: Carbon Steel Hot Dip Galvanized
Weight – Dimensions (W x L): 5.520 kg – 2.440 x 9.800
Type: air-cooled heat exchanger with removable cover
Header Boxes: Carbon Steel
Tubes: Carbon Steel
Frame: Carbon Steel Hot Dip Galvanized
Weight – Dimensions (W x L): 7.750 kg – 3.270 x 9.650
Shell and tube heat exchangers
High pressure heat exchanger
Design Code: EN13445
Design Data SS/TS : 120 Barg @ 350°c
Tema Type: AES
Shell Side Material: EN10028-3 P355NH + SS316L w.o.
Tube Side Material: EN10028-3 P355NH + SS316l w.o. / SS316L Floating Head
Tube Bundle Material: SS 316L
Weight 16 tons.
Sour water stripper condenser
Design Code: ASME VIII div. 1
Special Requirements: Wet H2S Service
Design Data SS/TS: 10 barg @ 120°c
Tema Type: BEU
Shell Side Material: ASME SA 516 Gr. 70
Tube Side Material: Carbon Steel with Phencote® Lining
Tube Bundle Material: Carbon Steel With Phencote® Lining
Weight 18 tons.
Feed exchangers
Design Code: ASME VIII div. 1
Max Design Data SS/TS: 25 Barg @ 410°c
Tema Type: AES
Shell Side Material: ASME SA 516 Gr. 70 + SS304L Clad (Explosion Bonded) & w.o. on Forgings
Tube Side Material: ASME SA 516 Gr. 70 + SS410 Clad (Explosion Bonded) & w.o. on Forgings
Tube Bundle Material: SS 304L
Stacked Exchangers
Weight 13 tons.
Splitter condensers
Design code: ASME VIII div. 1
Max Design Data SS/TS: 21 Barg @ 80°c
Tema Type: AES
Shell Side Material: ASME SA 516 Gr. 70
Tube Side Material: ASME SA 516 Gr. 70 with Phencote® Lining
Tube Bundle Material: ASME SA 179 with Uop High Cond™ Tubes
No. of Tubes: 6544
Tube-to-Tubesheet joint: Rolling Expanded and Seal Welded
Weight 75 tons.
Reactor heat exchangers
Design Code: EN13445
Max Design Data SS/TS: 35 Barg @ 100°c
Tema Type: NEN
Shell Side Material: EN10028-3 P355 NH
Tube Side Material: ASME SA 240 316L
Tube Bundle Material: SA 213 TP316L
Weight 10 tons.
Topping head condensers
Design Code: EN13445
Max Design Data SS/TS: 5 Barg @ 100°c
Tema Type: AJS
Shell Side Material: EN10028-3 P275 NH
Tube Side Material: EN10028-3 P275 NH
Tube Bundle Material: SA 179
Weight 15 tons.
Seal oil coolers
Design Code: ASME VIII div. 1
Max Design Data SS/TS: 28 Barg @ 100°c
Tema Type: AEM
Shell Side Material: ASME SA 240 S32205 (Duplex)
Tube Side Material: ASME SA 240 S32205 (Duplex)
Tube Bundle Material: SA 789 S32205 (Duplex)
Weight 400 kg.
Lube oil coolers
Design Code: ASME VIII div. 1
Max Design Data SS/TS: 10 Barg @ 100°c
Tema type: BEM
Shell Side Material: ASME SA 240 S32205 (Duplex)
Tube Side Material: ASME SA 240 S32205 (Duplex)
Tube Bundle Material: SA 789 S32205 (Duplex)
Weight 500 kg.
Tube bundles
Tube bundle with uop high cond™ tubes
Tema Type: AES
No. of Tubes: 6544
Tubes Material: ASME SA 179
Tubesheets Material: ASME SA 266 CL.2
Tube-to-Tubesheet Joint: Rolling Expanded and Seal Welded
Weight 43 tons.
Alkylation tube bundle
Tema Type: AEU
No. of U-tubes: 900
Tubes Material: ASME SA 334 GR. 1 with HF Requirements
Tubesheet Material: ASME SA266 Cl.2
Tube-to-Tubesheet Joint: Strength Welded and Rolling Expanded
Post Weld Heat Treated
Weight 19 tons.
Tube bundle refurbishment
Replacement of Tubes and Tubesheet.
Tema Type: AEU
No. Of U-Tubes: 124
Tubes Material: ASME SB 338 GR. F2 (Titanium)
Tubesheets Material: ASME SB 381 Ti – Titanium Gr. 2
Tube-to-Tubesheet Joint: Rolling Expanded
Weight 1 ton.
Tube bundle aluminium bronze
Tema Type: AET
No. of Tubes: 120
Tubes Material: ASME SB 111 C61400
Tubesheets material: ASME SA 266 CL2 + W.O. Alloy C61400
Tube-to-Tubesheet Joint: Rolling Expanded
Weight 1 ton.
Tube bundle
Tema Type: AEU
No. of U-tubes: 900
Tubes Material: ASME SA 210 GR. A1
Tubesheet Material: ASME SA 516 GR. 70
Tube-to-Tubesheet Joint: Rolling Expanded
Weight 8 tons.
Tube bundle with protective coating
Tema Type: AES
No. of U-tubes: 1000
Tubes Material: ASME SA 179
Tubesheet Material: ASME SA 266 CL.2
Tube-to-Tubesheet Joint: Rolling Expanded and Seal Welded, Flush to Tubesheet
Protective Coating Preparation
Weight 7 tons.
Multi-pipe and double pipe heat exchangers
Lpg cooler spare multitube bundle
Multitube Hair Pin Type Heat Exchanger
No. Of U-tubes: 85
U Tubes Straight Part Length: 8267 mm
Tubes Material: ASME SB 111 C68700
Tubesheet Material: ASME SB 171 C64600
Tube-to-Tubesheet Joint: Strength Rolling Expanded
Weight: 1400 kg
Isobutane evaporator
Double Pipe Heat Exchanger
Tubes Material: ASME SA 106 Gr. B + Suppl. Req. S9
Service Restriction: Hydrofluoric Acid Alkylation Aervice
External Surface Treatment: Thermal Spray Aluminium (TSA)
Flange Border Painted with Acid Detective Paint.
No. of Equipment in Series: 3.
Weight: 400 kg
Aftercooler
Multitube Hair Pin Type Heat Exchanger
No. of U-tubes: 22
U Tubes Straight Part Length: 6100 mm
Tubes Material: ASME SA 210 Gr. A-1
Tubesheet Material: ASME SA350 Gr. LF2
Shell: ASME SA 333 Gr. 6 / SA 420 Gr. WPL6
Tube-to-Tubesheet Joint: Strength Rolling Expanded
Weight: 1400 kg
Seal flush cooler
Multitube Hair Pin Type Heat Exchanger
No. of U-tubes: 7 with Cut&Twisted Fins
U Tubes Straight Part Length: 5750 mm
Tubes Material: ASME SA 789 S32205
Tubesheet Material: ASME SA 182 f60 S32205
Shell: ASME SA 790 S32205 / SA 815 S32205
Tube-to-Tubesheet Joint: Strength Welded and Light Expansion
Weight: 700 kg
Air heaters, economisers
Compressed air dryer with heat recovery unit
Design and Manufacturing
Materials: SS 316L
Weight: 1000 kg
Steam boiler oschatz-cmf: superheater tube bundle
Dim. [mm]: 2.550 x 3.300 x 6.900 (h)
Weight: 20.000 kg
Heat recovery units
Design and Manufacturing
Materials: Cs
Weight: 1000 kg
Heat recovery units
Design and Manufacturing
Materials: CS
Weight: 1000 kg
Furnace
Process radiant and convection
Manufacturing and Installation
Materials: CS + AISI 347COILS
Weight: 13.5 tons + 36 tons
Ggh ljungstrom – air-air pre heater
Manufacturing
Material: SS 316
Weight: 30 tons
Ggh h2so2 - h2so3
Design, manufacturing and Installation
Materials: CS
Weight: 13.5 tons
Nr.5 modules process kiln co-boiler steel frame and piping
Dim. [mm]: 5.900 x 8.920 x 2.065
Weight: 80.000 up to kg/each
Lead-zinc i.s. Blowing-up furnace
Material: Carbon Steel
With PWHT
Dim. [mm]: 8.500 x 5.000 h 6.600
Weight: 48 tons
FCC Parts
Flue gas line to expander
Design code: ASME B31.3
Material: ASME SA 240 304H / ASME SA 358 -304H CL.1 / SA182 F304H
Diameter x Thk : 1548 mm x 24 mm
Flue gas line to expander – floating support for double clapet isolation valve
Design Code: ASME VIII div. 2
Material: ASME SA 240 304H / ASME SA 358 -304H CL.1 / SA 182 F304H
Diameter x Thk : 1548 mm x 30 mm
Weight: 8500 kg
Fcc reactor riser and wye piece
Design Code: ASME VIII div. 1
Material: ASME SA 516 Gr.70
Diameter x Thk: Wye Piece 1400 mm x 32 mm / riser 1900 mm x 18 mm
With pwht.
Application and Dry Out at CMF Workshop of Refractory Lining with Rescocast 17 EC.
Weight: 56000 kg
Catalyst cooler
Design Code: ASME VIII div. 1
Material: ASME SA 516 Gr. 70 / SA 266 CL 2
Tubes Material: ASME SA 213 T11
Costruzioni Meccaniche Fini S.p.A.
Strada per Paringianu, 117
Zona Industriale Portovesme
09010 - Portoscuso (SU)
Italy